We were prepared to run with a reduced crew this week to finish forming the upper 1BR cistern when we got a call from US Concrete on Monday. If we could be ready, they could deliver us 58 yards on Thursday. The crew responded and we got the plumber, electrician and HVAC guy on site on Tuesday to complete their tasks in the slab preparation. The permits were filed and approved on Wednesday and we were ready to pour the tower villa slab and the first 2BR poolside villa footings on Thursday.
One interesting item to note. At the very edge of the covered porch, Shiraz nailed a piece of “drip line”, which is basically a small diameter rubber hose, to the bottom of the form a few inches from the edge. In the future, when the water comes off of the porch, it will travel down the front of the porch and flow underneath toward the rear of the structure unabated. The drip line will be exposed on the underside of the porch and create a point where the water can collect and drain off to the side.
We got the permits on Wednesday and the pour began Thursday morning. We had enough concrete to pour the top slab and columns of the tower villa.
The tower villa forms will remain in place for three weeks to maximize curing time for the concrete. This structure is one unified piece of concrete tied into the footings and stem walls. We were also able to complete the forming for the upper 1BR villa.
If we can get 60 yards, this is ready for pouring.
We also poured the footings for the first of the 2BR poolside villas. Now that the footings are in place for the 2BR poolside villa, the next step is the stem walls which are being formed here.
What started off as a week of limited productivity turned into a very productive one indeed. If we had a consistent supply of concrete, we could really be flying.
Have a great Sunday!